Uptake and concentration of heavy metals in dominant mangrove species from Hainan Island,South China

Environmental Geochemistry and Health - By investigating three dominant mangrove species, namely Aegiceras corniculatum, Kandelia candel, Ceriops tagal and their rhizosediment in Mangrove wetlands...     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

冻融循环作用下尾矿砂抗剪强度和变形特性研究

为探究冻融循环后尾矿物理力学特性的变化特征,使用高低温试验箱和应变控制式三轴剪力仪对处于不同初始条件下的尾矿砂进行不排水不固结试验,揭示了尾矿砂的抗剪强度参数、不同围压条件下的变形模量与冻融循环次数、含水率之间的关系。结果表明:相同含水率条件下,随冻融循环次数增加,尾矿砂黏聚力先减小后趋于稳定,内摩擦角先增大后减小,围压100 k Pa和200 k Pa时变形模量逐渐减小,围压300 k Pa时变形模量呈现先减小后缓慢增大的趋势;相同冻融循环次数条件下,随尾矿砂含水率增加,其黏聚力先增加后减小、内摩擦角不断减小;不同围压条件下变形模量在总体上均呈现出不断减小的变化趋势,围压200 k Pa时变形模量总的衰减量最大,100k Pa次之,300 k Pa最小。     

基于SHERPA的环境空气质量减排情景模拟评估

分析了SHERPA综合评价模型的基本原理和主要建模理念,重点介绍了其在环境空气质量减排情景模拟评估方面的作用,以及在排放源与受体关系(SRR)方面的处理方法,比较了其与欧盟常用的其他情景模拟模型的优缺点。SHERPA模型的特点是空间灵活性较好,对于任何给定地点,可以快速评估不同地区对该研究地点空气质量的影响。SHERPA模型的3个主要功能为污染物来源分析、决策支持和情景模拟。基于SHERPA模型对法国环境空气中PM_(2.5)、PM_(10)和NO_2年均浓度进行污染来源分析、决策支持分析和减排情景模拟评估,展示了模型在环境治理措施优先级筛选和政府间联合治理措施协调建议方面的功能和作用,以期为中国环境空气质量预测预报、环境质量管理措施的制定和成效评估等环境服务与管理工作提供借鉴。     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

我国中部城市环境全要素生产率的时空演变——基于Malmquist-Luenberger生产率指数分解方法

采用Malmquist-Luenberger生产率指数模型对我国中部地区80个地级市2003～2015年的城市环境全要素生产率及其分解部分进行了核算,在此基础上计算累积环境全要素生产率,运用核密度法分析了我国中部城市环境全要素生产率的地区差距和动态变化。研究发现:中部城市环境全要素生产率和技术进步分别以年均1. 39%、1. 85%的速度增长,技术效率以年均0. 02%的速度减少,中部城市环境全要素生产率增长主要由技术进步推动,技术效率出现退步迹象。中部地区环境全要素生产率、技术效率和技术进步率城市间差距在逐渐缩小,中部城市间出现明显技术"追赶效应"。     

显色条件对纳氏试剂分光光度法测定水中氨氮的影响

氨氮是水质监测和评价的重要指标之一。本文探讨了纳氏试剂光度法测定水中氨氮时显色温度和显色时间对测定结果的影响,并从空白测定、显色速率及校准曲线等方面进行了分析,提出了对测定方法的改进建议。     

水-粮食贸易:虚拟水研究进展

虚拟水思想强调的是水资源贡献，量化计算是其深入研究的基本，而是否选择虚拟水作为战略政策，应该考虑由不同国家的资源贡献和生产技术决定的比较利益。社会调适能力要求社会针对资源的第一性缺乏做相应调适并谋求解决手段，以提高资源管理能力。为此，需要结合我国的水和粮食安全问题，提出用虚拟水贸易解决我国水资源和粮食问题，提高我国对水资源缺乏的调适能力。     

警用头盔的人机工程学分析

警用头盔是武警部队使用最为频繁的单兵防护用具，本文基于人机工程学的理论，用人机工程学的观点对武警部队现装备的警用头盔进行分析和探讨，提出解决途径的设想，展望警用头盔的发展前景。     

序批式反应器生物强化处理苯酚废水的研究

将4株高效苯酚分解菌湿菌体分3批投加于序批式反应器(SBR),对活性污泥进行生物强化试验,分析活性污泥状态与性能变化,测定生物强化后对苯酚的降解能力.结果表明,随着生物强化过程的进行,沉降性能改善,污泥颗粒化趋势明显;生物强化后,活性污泥对苯酚降解能力、降解速率及对苯酚的耐受性明显提高:苯酚质量浓度为730～960mg/L时,苯酚完全降解时间可由正常的6h缩短至2h;6h内可完全降解苯酚的质量浓度由原来的880mg/L提高到2080mg/L,处理能力提高了1.36倍;当进水苯酚质量浓度增加到2400mg/L时,6h内污泥对苯酚的降解率仍达到60.1%.